1, we want to put the faucet hose into the faucet installation mouth, and hand tighten. Try to pull it in to see if it's connected securely. Then assemble the other necessary firmware to the faucet.
2, we want to assemble the faucet hose through the basin, and connected to the fixed parts, and then firmly fixed with screws and other live. Attention during debugging, to see whether the taps and the tub connection is tight, with or without loose.
3, fixed the faucet and basin, the basin into a fixed position, and then the inlet pipe and hose connected to the other end. When taking over, if hot and cold water points, remember that the left is hot water, the right is cold water. This basically completed the installation.