What is angle valve?

- Sep 25, 2017-

Corner valve is essential for every family, but many people do not understand the role of the angle valve. Here we come to tell you specifically what, what is the angle valve, and angle valve about the relevant knowledge.

What is the angle valve

Corner valve is the angle of the valve, angle valve and spherical valve similar to its structure and characteristics of the ball valve correction. The difference with the ball valve is that the exit of the angle valve is at an angle of 90 degrees to the inlet.

Corner valve classification


Industrial use

Angle valve, also known as triangular valve, angle valve, folding valve. This is because the pipe at the angle of the valve into a 90 degree corner shape, so called the angle valve.

Corner valve body has a water inlet, water control port, outlet three mouth, so called the triangular valve.

Of course, the angle valve in the continuous improvement, although still three mouth, but there are not angular angle valve.

Industry said angle valve: angle control valve in addition to the valve at right angles, the other structure and through a single seat control valve similar.

Angle valve characteristics

1. Simple flow path, dead zone and eddy current area is small, with the help of the media itself, the erosion can effectively prevent the media blockage, that is, a better self-cleaning performance;

2. Flow resistance is small, the flow coefficient is larger than that of single seat valve, which is equivalent to the flow coefficient of double seat valve. It is suitable for high viscosity, suspended matter and granular fluid, or for right pipe. Its flow is generally bottom out of the side out.

Special circumstances can be anti-installed, that is, the flow side into the bottom out.

Triangle valve hot and cold two (with blue, red mark distinction) The vast majority of its manufacturers are the same, hot and cold signs, mainly to distinguish which is hot water, which is cold water.

Angle valve function

1. Transfer from inside and outside the outlet;

2. Water pressure is too large, you can adjust the top of the triangle valve, off a little smaller;

3. The role of the switch, if the leading water leakage and other phenomena occur, you can turn off the triangular valve, do not have to worry about the total valve in the home;

4. nice and generous. Therefore, the general renovation of new homes are essential plumbing accessories, so when the renovation of the new house designers will also be mentioned.

Angle valve in the use of the process should also pay attention to the use of life problems, red and asbestos in more than 10 years, Fushan 5-8 years alloy about 3 years. Alloy about 3 years will be very brittle, may be broken pipe and can not be replaced, copper is easier to change.