1, clean the shower room walls and the bottom basin, please use the soft dry cloth, if has the slight dirt, please use the soft cloth or the sponge to moisten the neutral cleanser to carry on the cleaning, in the elimination stubborn scale, please use a small amount of alcohol to clear;
2, when using the bathroom special detergent, please according to its container on the attention of the correct use, the wrong use of the method will have adverse effects on the human body, and will cause adverse conditions of products;
3, do not use the following items for cleaning: acidic, alkaline solvents, pharmaceuticals, acetone thinner, powder and so on.
II. Glass Cleaning:
1, clear the shower room glass fouling, can be used with vinegar and salt of the mixture to scrub, you can remove stains. You can also use glassware cleaning liquid to paint the glass in the bathroom again, then wipe it with a toothbrush, then rinse glass with warm water.
2, for the shower room glass on the water stains, usually after the bath with glass scraping the shower room glass scraping, not wasting time, but also labor;
3, for the shower room glass yellow water stains, you need to use glass cleaning agent spraying, and then with a soft dry cloth scrub can be bright as new.
III. Use and maintenance of pulleys:
Push-pull shower door, there are two ways of sliding block and sliding wheel.
The problems should be noticed in the use of pulley and slider:
1, avoid the following force impact door, lest cause the activity door to fall off;
2. Adjust the adjusting screws of the slider regularly to ensure the effective bearing and good sliding of the sliding block to the movable door;
3, pay attention to regular cleaning slide, pulley, slider, add lubricant (lubricating oil or lubricating wax);
4, periodically clean up the debris in the track.
Four, tempered glass maintenance:
1, do not use sharp objects to strike or impact on the glass surface, so as to avoid breakage;
2, do not use corrosive liquid to wipe the glass surface, so as to avoid damaging the surface luster;
3, do not use coarse material to wipe the glass surface, in order to avoid scratches.
Five, aluminum alloy frame maintenance:
1, electrostatic spraying aluminum alloy frame maintenance: Electrostatic spraying aluminum alloy frame refers to the white, bone color, blue, yellow, red, purple and other solid spray-type aluminum alloy frame.
This kind of product must first prevent the sunlight direct and the sun to explode, because the resin material and chromophores powder will occur photosensitive reaction, resulting in the spray layer fading, the next can not use corrosive liquids or materials to wipe, the third can not use rough materials (including toothpaste) to wipe the surface; If there is a stain on the surface of the aluminum, please wipe it with neutral clean water.
2, oxidation coloring aluminum alloy frame maintenance: Oxidation coloring aluminum alloy frame refers to the gold, silver, silver, brushed silver, such as surface coloring aluminum alloy frame.
This kind of product is not easy to fade with respect to electrostatic coating, but its hardness is poor, so it can not be used to wipe the surface with coarse material, but not to depict the surface with sharp objects. If there is a stain on the surface of the aluminum, please wipe it with neutral clean water.
Six, the use and maintenance of acrylic shower basin:
1, do not use sharp objects against acrylic surface to avoid breakage;
2, do not use corrosive liquid to wipe acrylic surface, so as to avoid damaging the surface luster;
3, do not use coarse material to wipe the acrylic surface to avoid scratches.